page | 139
Advanced Operation
Commands
#set_input_hdcp
Sets the HDCP mode on the specied input.
Syntax
#set_input_hdcp input mode
Parameters
input
Type: INTEGER
Accepts the number of an HDMI input (1 - 4). Set this parameter to 0 to apply
the HDCP setting to all inputs (Feedback lists all HDCP settings for inputs in
order 1 - 4).
mode
Type: INTEGER
Accepts a number from the table below, corresponding to the desired HDCP
mode.
mode Description
0
Reject HDCP content
1
Allow HDCP version 2.2 and below
2
Allow HDCP version 1.4 and below
Example
#set_input_hdcp 1
INPUT_HDCP 1 0
Related Commands
#gets_input_hdcp
#get_output_hdcp
#set_output_hdcp
To Next Page
Loading...
Need help?
General
