○○○○○○○○○○○○○○○○○○○○○○
Presets - Edit Preset 3•23
○○ ○○○○○○○○○○○○○○○○○○○○
Presets - Edit Preset 3•23
Specify the Track number with the DIAL. If the
specified track number already exists, default
values are automatically assigned.
Press ENTER to confirm or ESCAPE to cancel
the operation.
COPY TRACK (F7)
This function allows you to copy the settings of
one track to another, saving time. The destina-
tion track assumes all the programmed settings
of the source track.
Select the source track and press the soft button
F6 to open the «Copy track» dialogue window.
Specify the number of the track to copy to with
the DIAL.
Press ENTER to confirm or ESCAPE to cancel
the operation.
Note: This operation does not copy the notes cap-
tured by the sequence. To copy the notes, use the
«Copy events» function (in «Edit Style» or «Edit
Song»).
ERASE TRACK (F8)
This function, available only if you are working
with a Song Preset in Song mode, allows you to
cancel tracks of the current Preset. In Style/Pre-
set mode, it is not possible to erase any tracks.
Select the track you wish to cancel. A track en-
gaged by the sequencer cannot be erased.
Press the soft button F8. You are prompted to
confirm with “Are you sure?”:
Press ENTER to confirm or ESCAPE to cancel.
Hint: Cancel Song tracks that are not used. The
resulting Song file will occupy less memory on disk.
Specify the Track number with the DIAL. If the
specified track number already exists, default
values are automatically assigned.
Press ENTER to confirm or ESCAPE to cancel
the operation.
COPY TRACK (F7)
This function allows you to copy the settings of
one track to another, saving time. The destina-
tion track assumes all the programmed settings
of the source track.
Select the source track and press the soft button
F6 to open the «Copy track» dialogue window.
Specify the number of the track to copy with the
DIAL.
Press ENTER to confirm or ESCAPE to cancel
the operation.
Note: This operation does not copy the notes cap-
tured by the sequence. To copy the notes, use the
«Copy events» function (in «Edit Style» or «Edit
Song»).
ERASE TRACK (F8)
This function, available only if you are working
with a Song Preset in Song mode, allows you to
cancel tracks of the current Preset. In Style/Pre-
set mode, it is not possible to erase any tracks.
Select the track you wish to cancel.
A track en-
gaged by the sequencer cannot be erased.
Press the soft button F8. You are prompted to
confirm with “Are you sure?”:
Press ENTER to confirm or ESCAPE to cancel.
Hint: Cancel Song tracks that are not used. The
resulting Song file will occupy less memory on disk.
○○○○○○○○○○○○○○○○○○○○○○
Presets - Edit Preset 3•23
○○ ○○○○○○○○○○○○○○○○○○○○
Presets - Edit Preset 3•23
Specify the Track number with the DIAL. If the
specified track number already exists, default
values are automatically assigned.
Press ENTER to confirm or ESCAPE to cancel
the operation.
COPY TRACK (F7)
This function allows you to copy the settings of
one track to another, saving time. The destina-
tion track assumes all the programmed settings
of the source track.
Select the source track and press the soft button
F6 to open the «Copy track» dialogue window.
Specify the number of the track to copy to with
the DIAL.
Press ENTER to confirm or ESCAPE to cancel
the operation.
Note: This operation does not copy the notes cap-
tured by the sequence. To copy the notes, use the
«Copy events» function (in «Edit Style» or «Edit
Song»).
ERASE TRACK (F8)
This function, available only if you are working
with a Song Preset in Song mode, allows you to
cancel tracks of the current Preset. In Style/Pre-
set mode, it is not possible to erase any tracks.
Select the track you wish to cancel. A track en-
gaged by the sequencer cannot be erased.
Press the soft button F8. You are prompted to
confirm with “Are you sure?”:
Press ENTER to confirm or ESCAPE to cancel.
Hint: Cancel Song tracks that are not used. The
resulting Song file will occupy less memory on disk.
Specify the Track number with the DIAL. If the
specified track number already exists, default
values are automatically assigned.
Press ENTER to confirm or ESCAPE to cancel
the operation.
COPY TRACK (F7)
This function allows you to copy the settings of
one track to another, saving time. The destina-
tion track assumes all the programmed settings
of the source track.
Select the source track and press the soft button
F6 to open the «Copy track» dialogue window.
Specify the number of the track to copy with the
DIAL.
Press ENTER to confirm or ESCAPE to cancel
the operation.
Note: This operation does not copy the notes cap-
tured by the sequence. To copy the notes, use the
«Copy events» function (in «Edit Style» or «Edit
Song»).
ERASE TRACK (F8)
This function, available only if you are working
with a Song Preset in Song mode, allows you to
cancel tracks of the current Preset. In Style/Pre-
set mode, it is not possible to erase any tracks.
Select the track you wish to cancel.
A track en-
gaged by the sequencer cannot be erased.
Press the soft button F8. You are prompted to
confirm with “Are you sure?”:
Press ENTER to confirm or ESCAPE to cancel.
Hint: Cancel Song tracks that are not used. The
resulting Song file will occupy less memory on disk.
To Next Page
Loading...
Need help?
General
