To Next Page

To Previous Page

○○○○○○○○○○○○○○○○○○○○○○

Disk 4•15

○○○○○○○○○○○○○○○○○○○○○○

Disk 4•15

4. Select the Group file from the RAM directo-

ry and its destination.

5. Press ENTER twice to execute the command.

SAVE ALL

Use «Save All» to save an entire set of file types

contained in RAM in a single step.

SAVE ALL SONG PROCEDURE (EXAMPLE)

1. Select ALL SONG from the main Save page.

2. Press ENTER to enter the FILE SELECTOR, then

select the destination device (Floppy or Hard

disk).

3. Select the destination Block in the disk di-

rectory, then press ENTER twice to start the

saving procedure

If necessary, select an empty location to cre-

ate a new Block using the method described

in the Quick Guide, page 1.47.

Warning: Use “Save ALL” with care as this proce-

dure overwrites all data at the destination. B e abso-

lutely sure, therefore, of the file content in disk be-

fore using the “Save ALL” procedures.

4. Select the Group file from the RAM directo-

ry and its destination.

5. Press ENTER twice to execute the command.

SAVE ALL

Use «Save All» to save an entire set of file types

contained in RAM in a single step.

SAVE ALL SONG PROCEDURE (EXAMPLE)

1. Select ALL SONG from the main Save page.

2. Press ENTER to enter the FILE SELECTOR, then

select the destination device (Floppy or Hard

disk).

3. Select the destination Block in the disk di-

rectory, then press ENTER twice to start the

saving procedure

If necessary, select an empty location to cre-

ate a new Block using the method described

in the Quick Guide, page 1.47.

Warning: Use “Save ALL” with care as this proce-

dure overwrites all data at the destination. B e abso-

lutely sure, therefore, of the file content in disk be-

fore using the “Save ALL” procedures.

○○○○○○○○○○○○○○○○○○○○○○

Disk 4•15

○○○○○○○○○○○○○○○○○○○○○○

Disk 4•15

4. Select the Group file from the RAM directo-

ry and its destination.

5. Press ENTER twice to execute the command.

SAVE ALL

Use «Save All» to save an entire set of file types

contained in RAM in a single step.

SAVE ALL SONG PROCEDURE (EXAMPLE)

1. Select ALL SONG from the main Save page.

2. Press ENTER to enter the FILE SELECTOR, then

select the destination device (Floppy or Hard

disk).

3. Select the destination Block in the disk di-

rectory, then press ENTER twice to start the

saving procedure

If necessary, select an empty location to cre-

ate a new Block using the method described

in the Quick Guide, page 1.47.

Warning: Use “Save ALL” with care as this proce-

dure overwrites all data at the destination. B e abso-

lutely sure, therefore, of the file content in disk be-

fore using the “Save ALL” procedures.

4. Select the Group file from the RAM directo-

ry and its destination.

5. Press ENTER twice to execute the command.

SAVE ALL

Use «Save All» to save an entire set of file types

contained in RAM in a single step.

SAVE ALL SONG PROCEDURE (EXAMPLE)

1. Select ALL SONG from the main Save page.

2. Press ENTER to enter the FILE SELECTOR, then

select the destination device (Floppy or Hard

disk).

3. Select the destination Block in the disk di-

rectory, then press ENTER twice to start the

saving procedure

If necessary, select an empty location to cre-

ate a new Block using the method described

in the Quick Guide, page 1.47.

Warning: Use “Save ALL” with care as this proce-

dure overwrites all data at the destination. B e abso-

lutely sure, therefore, of the file content in disk be-

fore using the “Save ALL” procedures.

Brand	GEM
Model	GPS3600
Category	Musical Instrument
Language	English

GEM GPS3600 User Manual

Table of Contents

Questions and Answers:

GEM GPS3600 Specifications

Related product manuals