○○○○○○○○○○○○○○○○○○○○○○
5•22 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
5•22 Reference Guide
Transposition in semitone steps.
PARAMETERS:
Variation: Selects one of the 4 Variations. Only
existing Variations can be selected (those with at
least one recorded Riff).
Riff: Selects one of the riffs from the chosen Vari-
ation. Only existing riffs can be selected. If the
Style is empty, the phrase «No Riff» appears.
Transpose: Determines the value of the trans-
position (in semitone steps).
Assignable values: -64 ... +64.
Note range from... to...: Sets the upper and
lower limits of the notes to be affected. To trans-
pose a single percussive instrument of the Drum
track, assign the same note to the highest and
lowest limit. For example, to change the snare
(D2) set the parameter to «Note range from D2
to D2».
Assignable values: C-1 ... G9
From locator... To locator...: Defines the start
and end point of the part to be affected. It is pos-
sible to specify the measure, beat and resolu-
tion.
Assignable values: within the actual limits of the
Riff.
Transpose
Transposition in semitone steps.
PARAMETERS:
Variation: Selects one of the 4 Variations. Only
existing Variations can be selected (those with at
least one recorded Riff).
Riff: Selects one of the riffs from the chosen Vari-
ation. Only existing riffs can be selected. If the
Style is empty, the phrase «No Riff» appears.
Transpose: Determines the value of the trans-
position (in semitone steps).
Assignable values: -64 ... +64.
Note range from... to...: Sets the upper and
lower limits of the notes to be affected. To trans-
pose a single percussive instrument of the Drum
track, assign the same note to the highest and
lowest limit. For example, to change the snare
(D2) set the parameter to «Note range from D2
to D2».
Assignable values: C-1 ... G9
From locator... To locator...: Defines the start
and end point of the part to be affected. It is pos-
sible to specify the measure, beat and resolu-
tion.
Assignable values: within the actual limits of the
Riff.
Transpose
○○○○○○○○○○○○○○○○○○○○○○
5•22 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
5•22 Reference Guide
Transposition in semitone steps.
PARAMETERS:
Variation: Selects one of the 4 Variations. Only
existing Variations can be selected (those with at
least one recorded Riff).
Riff: Selects one of the riffs from the chosen Vari-
ation. Only existing riffs can be selected. If the
Style is empty, the phrase «No Riff» appears.
Transpose: Determines the value of the trans-
position (in semitone steps).
Assignable values: -64 ... +64.
Note range from... to...: Sets the upper and
lower limits of the notes to be affected. To trans-
pose a single percussive instrument of the Drum
track, assign the same note to the highest and
lowest limit. For example, to change the snare
(D2) set the parameter to «Note range from D2
to D2».
Assignable values: C-1 ... G9
From locator... To locator...: Defines the start
and end point of the part to be affected. It is pos-
sible to specify the measure, beat and resolu-
tion.
Assignable values: within the actual limits of the
Riff.
Transpose
Transposition in semitone steps.
PARAMETERS:
Variation: Selects one of the 4 Variations. Only
existing Variations can be selected (those with at
least one recorded Riff).
Riff: Selects one of the riffs from the chosen Vari-
ation. Only existing riffs can be selected. If the
Style is empty, the phrase «No Riff» appears.
Transpose: Determines the value of the trans-
position (in semitone steps).
Assignable values: -64 ... +64.
Note range from... to...: Sets the upper and
lower limits of the notes to be affected. To trans-
pose a single percussive instrument of the Drum
track, assign the same note to the highest and
lowest limit. For example, to change the snare
(D2) set the parameter to «Note range from D2
to D2».
Assignable values: C-1 ... G9
From locator... To locator...: Defines the start
and end point of the part to be affected. It is pos-
sible to specify the measure, beat and resolu-
tion.
Assignable values: within the actual limits of the
Riff.
Transpose
To Next Page
Loading...
Need help?
General
