To Next Page

To Previous Page

PART 1

GENERAL INFORMATION

Section 1.1

Generator Basics

Page 10

INTRODUCTION

This diagnostic repair manual has been prepared especially for

familiarizing service personnel with the testing, troubleshooting

and repair of the vertical home standby systems. Every

effort has been expended to ensure that the information and

instructions in the manual are both accurate and current.

However, the manufacture reserves the right to change, alter

or otherwise improve the product at any time without prior

notification.

The manual has been divided into several PARTS. Each PART

has been divided into SUBSECTIONS and each subsection

consists of several sub headings.

It is not the manufacturer's intent to provide detailed disassembly

and reassembly of the vertical home standby. It is the

manufacturer's intent to (a) provide the service technician

with an understanding of how the various assemblies and

systems work, (b) assist the technician in finding the cause

of malfunctions, and (c) effect the expeditious repair of the

equipment.

PARTS

Part 1 – Provides the basic understanding of the generator as

well as operating instructions for commons tasks.

Part 2 – Provides the basics of the AC alternator design and the

AC troubleshooting portion of the manual.

Part 3 – Provides the troubleshooting and diagnostic testing

procedure for the 50 amp transfer switch with the EZ Transfer

Operator.

Part 4 – Provides the troubleshooting and diagnostic procedure

for the engine related problems and the controller.

Part 5 – Provides detailed step-by-step instructions for the

replacement of the rotor/stator and engine.

Part 6 – Illustrates all of the electrical and wiring diagrams for

the generator and transfer switch.

GENERATOR IDENTIFICATION

Data Plate

The data plate that is affixed to the generator contains

important information pertaining to the unit, including its model

number, serial number, amperage rating, and voltage rating.

The information from this data plate may be required when

requesting information, ordering parts from the factory.

Item Number

Many home standby generators manufactured are to the unique

specifications of the buyer. The model number identifies the

specific generator set and its unique design specifications.

Serial Number

Used for warranty tracking purposes.

Figure 1. Typical Data Plate

Brand	Generac Power Systems
Model	CorePower
Category	Portable Generator
Language	English

Generac Power Systems CorePower User Manual

Table of Contents

Questions and Answers:

Generac Power Systems CorePower Specifications

Related product manuals