Generac Power Systems CorePower User Manual

ENGINE/DC CONTROL
PART 4
Page 59
Section 4.4
Troubleshooting Flowcharts
REFER TO ENGINE
SERVICE MANUAL
GOOD
BAD
GOOD
GOOD
READJUST
ADJUST OR
REPLACE
CLEAN, REGAP
OR REPLACE
FIND AND CORRECT
CAUSE OF NO FUEL
OR LOW PRESSURE
READJUST
GOOD
GOOD
GOOD
BAD
BAD
BAD
BAD
BAD
BAD
Problem 23 – Engine Starts Hard and Runs Rough / Lacks Power / Backfires
CHECK
FLYWHEEL
KEY
BAD
REPLACE CHOKE SOLENOID
TEST 60 – CHECK
FUEL SUPPLY AND
PRESSURE
IF RECONFIGURED TO LP GAS,
VERIFY THAT PROPER
PROCEDURE WAS FOLLOWED.
(REFER TO SECTION 1.3)
TEST 64 –
CHECK FOR
IGNITION SPARK
TEST 67 – CHECK
IGNITION MAGNETOS
TEST 70 –
CHECK AND
ADJUST VALVES
TEST 65 –
CHECK SPARK
PLUGS
TEST 66 – CHECK
ENGINE
COMPRESSION
TEST 63 – CHECK
CHOKE SOLENOID
CHECK AIR FILTER -
REPLACE AS NEEDED
GOOD
TEST 13 – CHECK
AND ADJUST
ENGINE
GOVERNOR

Generac Power Systems CorePower Specifications

General

Brand	Generac Power Systems
Model	CorePower
Category	Portable Generator
Language	English