Genesis G80 - Ipod Operation; Playing Ipod; Pause; Skip

35
iPod® Operation
Playing iPod®
1. Use iPod exclusive cable to connect iPod
to USB connector.
2. Press [HOME] > [Media] > [iPod].
It runs iPod mode.
Pause
You can pause the playing  le. For more
details, refer to “Pause” on page 20.
Skip
You can play the previous or next  le. For more
details, refer to “Skip” on page 20.
Search
You can rewind/fast forward to a speci c point
of a  le. For more details, refer to “Search” on
page 20.
Seek
You can play the  le directly by searching for
the desired  le. For more details, refer to “Seek”
on page 21.
List
You can play the desired  le by searching the
 le list included in iPod.
1. Press [List].
Or press [Menu] > [List].
2. Press the desired  le.
• Press [Menu] > [Now Playing] to move to
the current playing screen.
• Press [Menu] > [Edit Category] to edit the
category, then press the desired category.
After moving to the desired category by
turning the controller left or right, press
the controller.
Shuffle
All  les can be played randomly.
For more details, refer to “ Shu e” on page 21.
Repeat
The current playing  le is played repeatedly.
1. Press [Menu] > [Repeat].
2. Press the desired item.
• [Repeat All]: Repeats all files.
• [Repeat One]: Repeats the current file.
,
Note
You can change the Repeat function by
pressing
[ ]/[ ] on the playing screen.
: Repeat All, : Repeat One
Scan
This function scans the beginning of each  le
for 10 seconds. For more details, refer to MP3
CD operation of “ Scan” on page 22.
iPod® Operation