61
Voice Recognition System
What is voice recognition?
Voice recognition technology runs the
system as ordered by recognizing your voice
command to help with the operation of
multimedia while you are driving the car.
Regretfully, not all possible voice commands
are recognized by the system due to
technological limitations. To make up for these
limitations, the system displays the voice
commands that are available for you to use.
There are errors in communication between
people. Likewise, voice recognition sometimes
misunderstands your voice command under
certain circumstances. If this happens, either
check the screen for the available options and
say the command again, or manually select
and press the button for the corresponding
command on the screen.
Voice recognition features by
language
Voice recognition support availability varies
according to the language set for the system.
Please verify the current language setting
before using the voice recognition.
• If you change the language set for the
system to Korean, voice recognition will not
be supported. Change the system language
to other language.
Operating voice command
Condition for voice command system
Most of the functions can be operated by
voice. Please follow the instructions below for
optimal voice recognition performance.
• To improve the voice recognition
performance, keep your car interior quiet by
closing all windows and the sunroof.
• Press the voice recognition button and say
the desired voice command after the beep
sound.
• The microphone is positioned above the
driver. Voice commands should be spoken
by driver practicing proper posture.
• Pronounce the voice commands naturally
and clearly as if in a normal conversation.
• Special symbols of Phonebook Name are
not considered in voice recognition.
Ex) James-Smith : “James Smith”
• House number or digits in Phonebook Name
should be spoken discretely.
Ex) S1234 : “South one two three four”
• Depending on the speci cations, some
commands may not be supported.
Starting voice recognition
1. Press [ ] on the steering wheel remote
control.
2. Say a command.
,
Note
• For proper recognition, please say the
command after the voice instruction and
beep sound.
• When starting voice recognition, the
voice command entry window with six
representative commands is displayed.
Voice Recognition System
To Next Page
Loading...
Need help?
General
