Parachute Folding
Make sure that the Parachute dome, rigging Lines and their attachment
to the dome are not damaged before laying the parachute. The dome
and rigging lines should be dry and clean. Repack the parachute if the
previous packaging is more than 10 days ago, or you were carrying UAV
in an airplane.
1. Make sure that the parachute doesn’t have any damages.
2. Make sure the rigging lines are not tangled.
Make sure that rigging lines are not tangled in the process of parachute laying.
Control rigging lines’ pockets position. They must remain on the outside of the folded
dome.
3. Smooth the dome and fold it in half, aligning one side with other.
Folding parashute dome in half
18
To Next Page
Loading...
