Arctic Launcher
«Arctic» Launcher is developed for launches in cold conditions. It uses wire springs
system for carriage pulling.
«Arctic» launcher
Rules of Springs Use
• Check the springs for a damage before using.
• Install the springs directly before launch only.
• Do not stretch the springs.
• Use the springs with «Arctic» launcher only.
• Do not leave stretched springs on the launcher for a long time.
• Use soft hair-free material wetted with ethyl alcohol for cleaning.
• Avoid springs contact with dirt and other objects.
• Wire coil springs should be stored in launcher’s transport bag in dry place.
34
To Next Page
Loading...