Geoscan 201 - Camera Presets and Restoration Procedures

Presets
Geoscan UAVs are equipped with 2 presets for Sony DSC-RX1RM2 cameras.
Use Mode Dial near ON\OFF switcher to select preset for your needs.
Preset 1 serves for shooting in normal daylight conditions. The aperture value is xed,
which provides xed aperture for better ortophoto mosaic generation.
Use these settings for this mode:
• Mode Dial in «1» position;
• Focus Mode Dial in MF position;
• Exposure Compensation Dial in 0 position;
• Macro switching ring in 0,3m-∞ position;
• Aperture Ring in 4,5 (rst mark after 4).
Preset 2 — universal set with automatic variable aperture control (Shutter Priority).
Use these settings for this mode:
• Mode Dial in «2» position;
• Focus mode dial in MF position;
• Exposure compensation dial in 0 position;
• Macro switching ring in 0,3m-∞ position.
The aperture value is not taken into account.
Preset 3 can be used for user settings.
Select settings in menu, go to camera settings (tab 8) and select Memory.
Set Mode Dial in «3» position and press button in the middle of Control Wheel.
45