Rules of Rubber Cords Use
• Check the condition of the rubber bands regularly. Replace the damaged ring
by a spare ring from the spare parts kit, if damages are found.
• Don’t keep the rubber cords stretched for a long time. Pull cords directly before
placing UAV on the launcher.
• Do not allow long-term exposure of rubber cords in direct sunlight in a warm
season.
• Do not allow the rubber cords to freeze in a cold season. Before to installation
keep them in a warm place and pull directly before starting. Immediatelyremove
the cords from the launcher and put them to a warm place after the UAV starts.
28
To Next Page
Loading...
