Connections with Clients
95
7
5. To decode key frames for IP source, select Only decode key frame when source is IP
device. To decode all frames when a motion is detected and decode key frames when
there is no motion, select Decode all frames upon motion detection.
6. If the camera is a fisheye camera, select Enable fisheye dewarping, and click
to
open the FisheyeConfig window. To configure dewarping settings, right-click the image
in the window. .
7. To show the camera name specified in Step 2 on the live view, select Show camera
name.
8. Click Apply.
To Next Page
Loading...
Need help?
General
