Administrator Mode
45
5
5.3.3 General Setup
In the General Setup page, you can configure the command port of GV-Recording Server
and configure system log settings to allow passive connection from GV-IP Devices.
Figure 5-22
[General Setup]
Server Name: Type a name to identify the GV-Recording Server. The default value is the
computer’s name.
Command Port: The default command port is 20000. The command port is used for
running the recording server program. By default, 9 ports are reserved ranging from
20000 to 20009. If other program is using the default ports, you may need to change the
command port value.
Auto Start Recording: Automatically start recording video once the GV-Recording
Server program is activated.
To Next Page
Loading...
Need help?
General
