102
E. How to Avoid Network Bottleneck
To increase network bandwidth and avoid network bottleneck, you need to set up multiple
networks and divide networks into different multiple subnets or segments. Next, organize IP
channels received and clients transmitted into different networks.
1. To set up multiple networks on GV-Recording Server, you need to install multiple
network cards. Each network card is assigned a different IP address and subnet mask.
2. Organize IP channels and clients into groups and then assign each group to different
network cards using the IP addresses you have set up.
The GV-Recording Server can receive from up to 128 IP channels and transmit up to 300
channels. In the example above, the incoming 128 channels are divided among two network
cards and the outgoing 300 channels are divided among four network cards to relieve
network congestion.
To Previous Page
Loading...
Need help?
General
