Gerber HS15 Plus - Page 77

HS15
plus
PLOTTER ERROR CODES
Error
Number Error Description Operator Response
1 Program checksum failure Try power up again.
2 RAM memory failure Try power up again.
3 Plotter type error Call Gerber Field Service.
4 Power relay closed Call Gerber Field Service.
5 Power relay open Call Gerber Field Service.
6 Peripheral control chip error Call Gerber Field Service.
7 Heartbeat error Call Gerber Field Service.
8 Motor encoder failure Call Gerber Field Service.
9 X motor encoder failure Call Gerber Field Service.
10 Y motor encoder failure Call Gerber Field Service.
11 Z motor encoder failure Call Gerber Field Service.
12 Theta motor encoder failure Call Gerber Field Service.
13 Power relay off Try power up again or call Gerber Field Service.
14 X axis error Call Gerber Field Service.
15 Y axis error Call Gerber Field Service.
16 Z axis error Call Gerber Field Service.