G5 – Owner‘s Manual | 101
The following table lists all available and relevant Continuous Controllers with their controller num-
bers and description. Each line is updated together with the selection of a controller number. Active
controller numbers are automatically stored in the G5's device database. The following table shows
an expanded view of the underlying menus. Each controlling component connected to the corre-
sponding input channels (HH Pedal, Snare, Ride, Toms/Aux) has access to the same set of available
controllers. However, in the factory configuration they are set to different initial values. They go
through the same list, just starting at a different starting point.
G5 Continuous Controllers
Continuous Controller
(CC)
To Next Page
Loading...
