In the SETTINGS you can adjust your trigger and all
the associated functions to your wishes.
In the upper area you see the selected instrument.
With the dial [6] [<ZONE>] you can choose be-
tween the zones of the instrument (HEAD I RIM;
BELL I EDGE I BOW).
The following functions are available for the se-
lected trigger:
X-Talk
Press [F1] to adjust the trigger behaviour in case of
crosstalk.
Preset
Press [F2] to access the presets. Here you can load
and save your own trigger presets.
Exit the menu
Press [F3] to go back one step.
Parameter
The following values are available for selection:
GAIN, THRESHOLD, HIGH LEVEL, SCAN TIME,
RETRIGGER MASK, TRIGGER TYPE, CURVE ID, DYN
LEVEL, DYN TIME.
Use the dial [5] to select the corresponding pa-
rameter and change the value with the dial [7].
For more information, see the following chapter
To Next Page
Loading...
