You can send any input signal to a variety of
outputs built into the G5 using the routing matrix.
The matrix also controls the USB out.
In this section, you will learn how to work with each
matrix.
The routing function of the G5 is divided into 2
input categories: Routing and Routing Others.
While the input channels displayed vary, the
functionality is identical. Thus, the content of the
following subchapters applies to each matrix.
DAW
In addition to the 4 Direct-Outs, 2 USB-Outs are
available. Please read chapter Routing DAW.
To Next Page
Loading...
