122 |G5 – Owner’s Manual
B9H 63H 2FH 62H rr 06H 00
Request Input / Gain Reduction / Output levels (see below for Re-
sponse message)
* Edit controls of all Hi-Hat trigger notes are working on same parameter set and needs only to send once
(rr=46).
Individual Hihat Volumes can be send with: rr=42 (Bow), rr=26 (Edge), rr=19 (Bell), rr=44 (Pedal Chick), rr=21
(Pedal Splash)
** “Sound Select” is managed by sending “Sound Group” NRPN and “Sound Instr.” NRPN. Available Sound
Groups are: 0=Kick, 1=Snare, 2=Tom, 3=Crash, 4=Ride, 5=Hihat, 6=Cymbal SFX, 7=Percussion1, 8=Percussion2,
9=Sound-FX, 10…109=Imported Sounds, 110…=Waves
*** Pad Mixer, EQ and Compressor settings are done per pad trigger group (e.g. head + rim, or bow + edge
+ bell). NRPN needs only to send once using the “head” resp. “bow” trigger note.
20.3.4 EFFECTS NRPN CONTROLS
Ambience Level 0 (mute) to 7Fh (max)
Ambience ON/OFF 0 = OFF, else ON
Reverb Level 0 (mute) to 127 (max)
Pre-Delay Time 0 = 0ms, till 127 = 250ms
Reverberation Time 0 (shortest) till 7Fh (longest)
Pre-High-Pass Filter Frequency 0=OFF…64=~500Hz...127=~1KHz
High-Shelf Filter (Tone) Gain 0=-12dB, 64=0dB, till 7Fh = +6dB
High Damp 0= no damping, till 127=max damping
Gated Reverb Threshold Level 0=OFF, 1 = -114dB till 127 = -24dB
Reverb Type 0..2=Room, 3..5=Hall, 6..8=Plate1, 9..11=Plate2
Send to Room Reverb 0 (mute) to 127 (max)
Instrument Reverb ON/OFF 0 = OFF, else ON
Routing bus switches (see description of NRPN 370FH, page 7)
Reverb Level 0 (mute) to 127 (max)