With [FX Send], you can assign the effect volume
to each channel specifically.
Select channel
Use the dial [5] [<INPUT>] or the navigation keys [8]
to select the channel you want to change the
volume of.
Change volume
Use the dial [7] [<VALUE>], the navigation keys [8]
or the [+] & [-] keys to change the volume.
Grouping
Turn the dial [6] and activate the GROUPING
function. Now you have the possibility, when
selecting the tom and cymbal channels, to adjust
them up or down as one unit.
Exit the level
Press [F3], to exit the level or any menu key to
exit the entire menu.
To Next Page
Loading...
