Gewa G5 - Trigger Curve Packet Description; Other NRPN Controls

G5 – Owner‘s Manual | 129
20.3.8 TRIGGER CURVE PACKET DESCRIPTION
Description
0x5443
Packet Type = "TC" (Trigger Curve)
CRV ID
Curve ID (xx..15)
VAL1
1st value of trigger curve (X=0)
VAL2
2nd value of trigger curve (X=MAX/8)
…
…
VAL9
Last value of trigger curve (X=MAX)
20.3.9 OTHER NRPN CONTROLS
NRPN # (High|Low)
Description
Power-up
default
3703h
Fixed Hihat 0=OFF, else ON (fixed Closed HH)
0
3704h
Snare Style 0=Rimshot, 1=Crosstick, 2=X-Fade
0
3705h
X-Fade Balance 0=Rimshot only, to 7Fh=Crosstick only
40h
3706h
MIX-IN volume 0=mute … 40h=-12dB… 7Fh=0dB
0 (muted)
3707h
Synth Master volume 0 (mute) to 7Fh (max)
7Fh
370Fh
“Playback” Routing bus switches: bits 6/5 : Master (Main) Out L/R
bits 4/3 : Monitor Out L/R
bits 2/1 : Headphone Out L/R
3710h
USB Audio IN Level 0=mute … 40h= -12dB … 7Fh=0dB
40h (-12dB)
3740h
LED Brightness Control 0=LEDs OFF, till 5=highest brightness
5
3741h
Bluetooth commands: 0 = triggers disconnect A2DP link
40h (BT ON)
1 = Pairing mode
3Fh = BT Module OFF
40h = BT Module ON
7Fh = BT module factory reset