Gewa G5 - 19 Update

G5 – Owner‘s Manual | 113
 Use the navigation keys [8] or the dial
[6] <CHAR> to find the desired charac-
ter.
 Press [ENTER] to confirm the respective
character.
 To change the cursor position, use the
dial [5] <CUR>.
 Use the dial [7] ABC abc to change the
upper and lower case as well as special
characters.
 You can delete individual characters by
pressing [F2]].
 You can cancel at any time by pressing
[F3].
 Save the Bluetooth name under [F1].
19 UPDATE
GEWA is constantly working on updates to give you the most enjoyment out of your instrument in the
future.
Under [SETUP] -> INFO you will find the version and serial number of your G5 module.
Updated files can be found at: https://www.gewaelectronics.com/eu/downloads
Follow the installation steps from the website and load the update into the root directory of your
USB-stick.
1. Insert the USB stick and switch on the device. Keep the [F1] and [F3] keys pressed during
the booting-up process.
[P]
+
[F1]
+
[F3]
2. Follow the instructions and press [ENTER].
3. After the successful update, remove the USB-stick and reboot the module.