28 |G5 – Owner’s Manual
10.1 SOUND EDITING
In the view you now have the possibility to edit or
exchange your loaded sound.
Functions:
[F1] [FX SEND] Mixer to add effects to
your sound.
[F2] [SOUND] Sound selection for the se-
lected input.
[F3] Back to INSTRUMENT main menu
The display window is always overwritten with the
currently loaded sound (e.g. 22" Brooklyn twenty-
two) of the selected zone (KICK I HEAD).
In the list you will find the parameters that you can
change.
Use the dial [5] or navigation keys [8] to select the
parameter.
You can also select the input and the zone on the
level with the dial [6].
To change a value, use the dial [7] or the naviga-
tion keys [8].
10.1.1.1 INSTRUMENT VOLUME
This volume control affects the basic volume of the currently active pad and zones. In the [MIX]
menu, you can mix the preset in relation to the master outs.
10.1.1.2 COARSE TUNING
This control allows a coarse tuning of the drum in steps of semitones up and down.
10.1.1.3 FINE TUNING / STIMMUNG IN VIERTELTONSCHRITTEN
From the selected semitone, you can fine-tune the pitch, which allows fine-tuning by a quarter tone
(50 cents).
To Next Page
Loading...
