Gewa G5 - Page 28

14 |G5 – Owner’s Manual
Close the Hi-Hat to the lowest position. Follow the instruction and press [F1] “NEXT”.
[F1] NEXT
Open the hi-hat completely. Confirm the action by pressing the button [F1] “FINISH”.
[F1] FINISH
Now the hi-hat is fully calibrated and playable. With the hi-hat symbol you can directly test whether
the mechanism works. Then confirm the setting by pressing the button [F1] „DONE“
[F1] DONE
If you want to leave the calibration without saving, press the button [F3].
3
4
5