GRAPHTEC FC9000 Series - Apparel (AP) Mode

13-2
13.1
Apparel (AP) Mode
When Apparel Mode is set to Enabled, this function is available. For applications other than it, set to OFF.
When Apparel Mode is set to Enabled, the following functions etc.are available.

$[LVDGMXVWPHQW

F command

CUT DEMO

Time out

Separator

2IÁLQHRXWSXW

Test cut
When Apparel Mode is set to Enabled, the following functions etc. are not available.

Registration Mark

Server and Data Link
Supplement
When the Apparel (AP) Mode is enabled and the data sort tool is set to ON, the tool condition that the TOOL is set to PEN will be
SORWWHGÀUVW
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE screen (1/4) is displayed.
3
Press the POSITION ( ) key.
ADVANCE screen (2/4) is displayed.