Configuring optional NH servers
If you have one or more optional NH K2 Media Servers, you next configure those servers. This
section applies to both NH1 (1 Gig FTP) servers and NH10GE (10 Gig FTP) servers.
NOTE: Multiple NH servers on a K2 SAN must be of the same type, either all NH1 or all NH10GE.
1. In the K2Config application tree view, select the K2 Media Server you are configuring.
2. Click the Configure button.
The Configure K2 Server wizard opens to the Define server roles page.
Configure Define Server Roles page - NH server
1. Enter the name for the K2 Media Server, as currently configured on the machine.
2. Select FTP server and NAS server.
3. Click Next.
The Software Configuration page opens.
02 February 2012 K2 SAN Installation and Service Manual 147
Configuring and licensing the K2 SAN
To Next Page
Loading...
