GRASS VALLEY K2 - Chapter 5: Planning and Implementing a K2 SAN with Siteconfig

To Next Page

To Previous Page

Chapter 5

Planning and implementing a K2 SAN with

SiteConfig

This section contains the following topics:

• About developing a system description

• Importing a system description

• About device and host names

• Modifying a device name

• Modifying the control network

• Modifying the FTP/streaming network

• Modifying a media (iSCSI) network

• About IP conﬁguration of network interfaces on devices

• Modifying K2 client unassigned (unmanaged) interface

• Modifying K2 Media Server unassigned (unmanaged) interface

• About SiteConﬁg support on K2 devices

• Discovering devices with SiteConﬁg

• Assigning discovered devices

• Modifying K2 client managed network interfaces

• Modifying K2 Media Server managed network interfaces

• Making the host name the same as the device name

• Pinging devices from the PC that hosts SiteConﬁg

• About hosts ﬁles and SiteConﬁg

• Generating host tables using SiteConﬁg

02 February 2012 K2 SAN Installation and Service Manual 81

Other manuals for GRASS VALLEY K2