GRASS VALLEY K2 - To Follow Cabling Instructions; Basic K2 SAN - Online or Production

To follow cabling instructions
To follow cabling instructions for your K2
™
Storage Area Network (SAN), do the following:
1. Find the system cabling diagram that matches your K2 system.
2. Follow the references below the system diagram to locate cabling instructions for the individual
devices of your K2 system.
Basic K2 SAN - Online or Production
RAID Primary
Chassis
RAID Expansion
Chassis (optional)
K2 Media Server
Ethernet Switch
Control
Media
Control
Media
Control
FTP
Media
Control point PC
K2 clients
Control
Control
FTP/streaming
Control
Media
Fibre Channel
NH Server
(optional)
Control
FTP
Turn to these instructions:Of this model or
platform…
To cable this K2 SAN device…
K2-XDP basic on page 51K2 Summit 3G
system or first
generation K2
Summit system
K2 Summit system
K2-SWE basic online/production on page 52HP 2910Gigabit Ethernet Switch
K2-SVR basic on page 55Dell R610K2 Media Server
K2-SVR-NH10GE online/production on page 56Dell R610NH10GE K2 Media Server
(optional)
K2 RAID basic online/production on page 58K2 RAIDK2 RAID
This manual documents the default GigE switch configuration. Other configurations are available,
depending on your port count and FTP bandwidth requirements.
48 K2 SAN Installation and Service Manual 02 February 2012
Cabling K2 SAN devices