2. Click Next.
The FTP Server Configuration page opens.
Configure FTP Server Configuration page - Redundant K2 SAN server A
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4 and FTP Data Socket
Timeout = 60. Only qualified Grass Valley personnel should specify other values, as these settings
are intended for use only with custom systems designed by Grass Valley.
1. Click Next.
The Completing the Configuration Wizard page opens.
2. Click Finish.
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
Next, configure the redundant server.
Configuring server B
Prerequisites:
• Server A is configured
02 February 2012 K2 SAN Installation and Service Manual 173
Configuring and licensing the K2 SAN
To Next Page
Loading...
