• Power on
K2 RAID Expansion chassis (optional)
• Fibre channel cable(s) connected
• Power on
Defining a new K2 SAN
If you import a SiteConfig system description file in which the SAN is defined, you do not need to
define a new SAN. You can skip this task and instead start by configuring the first K2 Media Server.
1. On the control point PC, open the K2Config application.
A login dialog box opens.
188 K2 SAN Installation and Service Manual 02 February 2012
Configuring and licensing the K2 SAN
To Next Page
Loading...
