Configure FTP Server Configuration page - Basic SAN NH server
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4 and FTP Data Socket
Timeout = 60. Only qualified Grass Valley personnel should specify other values, as these settings
are intended for use only with custom systems designed by Grass Valley.
1. Click Next.
The Completing the Configuration Wizard page opens.
2. Click Finish.
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
If you have other NH servers, configure them similarly, then configure K2 clients and/or other iSCSI
clients on the K2 SAN next.
Configuring the redundant K2 SAN - Online and Production
Work through the topics in this section sequentially to configure an Online (Tier 1) or Production
(Tier 2) redundant K2 SAN.
Prerequisites for initial configuration - Redundant K2 SAN
Before beginning your initial configuration, make sure the devices of the K2 SAN meet the following
prerequisites.
02 February 2012 K2 SAN Installation and Service Manual 151
Configuring and licensing the K2 SAN
To Next Page
Loading...
Need help?
General