Configure File System Client Configuration page - NH server
This system does not function as a file system server. It does function as a file system client, which
is validated from this page.
1. Do not select Reserved Bandwidth unless instructed to do so by Grass Valley. This system is
usually not configured for RVIO.
2. Click Check.
3. When the wizard reports that the configuration is correct, click Next.
If you get a “The V: will not be available until this device is rebooted…” message, you can safely
continue now and reboot later when instructed to do so.
The FTP Server Configuration page opens.
150 K2 SAN Installation and Service Manual 02 February 2012
Configuring and licensing the K2 SAN
To Next Page
Loading...
