9. After restart, to verify that the software is installed, on the Windows desktop right-click My
Computer and select Manage.
The Computer Management window opens.
10. In the left pane select Device Manager.
11. In the right pane open the System devices node and verify that GVG ISCSI Multi-Path Device
Specific Module is listed.
Configuring a K2 client for the K2 Storage System
Before doing this task, make sure the write filter is disabled on the K2 Summit system you are
adding to the K2 SAN.
1. On the PC that hosts K2Config, open the K2Config application.
A login dialog box opens.
2. Log in to the K2Config application with the administrator account.
The K2Config application opens.
02 February 2012 K2 SAN Installation and Service Manual 233
Configuring clients on the K2 SAN
To Next Page
Loading...
