Configure New K2 System page 1 - Nearline K2 SAN
1. Create a name for your system and type it in the Name box.
2. Select Nearline.
The Server redundancy option is not selected and is disabled. This option applies to media
database redundancy. Since the Nearline system has no media database, this setting is correct
for both redundant and non-redundant Nearline systems.
3. Click Next.
Page 2 opens.
190 K2 SAN Installation and Service Manual 02 February 2012
Configuring and licensing the K2 SAN
To Next Page
Loading...
