2. Do not select Reserved Bandwidth unless instructed to do so by Grass Valley. This system is
usually not configured for RVIO.
3. Click Check.
4. When the wizard reports that the configuration is correct, click Next.
If you get a “The V: will not be available until this device is rebooted…” message, you can safely
continue now and reboot later when instructed to do so.
The FTP Server Configuration page opens.
Configure FTP Server Configuration page - NH server
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4 and FTP Data Socket
Timeout = 60. Only qualified Grass Valley personnel should specify other values, as these settings
are intended for use only with custom systems designed by Grass Valley.
1. Click Next.
The Completing the Configuration Wizard page opens.
2. Click Finish.
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
Check the V: drive
Prerequisites:
• The K2 Media Server is configured
204 K2 SAN Installation and Service Manual 02 February 2012
Configuring and licensing the K2 SAN
To Next Page
Loading...
