Gsertel RCS 100 User Manual

RCS User Manual
37
There are four controls that are common to almost all the profile types (RF, ASI, IP and ETR290):
TS Rec., Active, Type and Trap.
TS Rec: Turning on the control corresponding to the “TS Rec.” column, alarm controls can be
individually configured to start recording when the corresponding alarm occurs (the time elapsed
since the TS Rec. is turned ON until it begins to record is 1 minute). These TS recordings are added
to the list of TS recordings (See section 3A.7.- TS Recorder). The name of the recordings
corresponding to alarm events includes the name of the alarm.
Active: User can activate or deactivate each alarm and set the parameters for each alarm as well.
Type: For each alarm you must select what type it is: Info (blue), Warning (yellow), Error (red).
Select the type of
the alarms profile
Actions that the user can
do with the selected
profile
Configuration parameters.
Depends on the type of profile
List of profiles of the selected
type. To select click on the
button placed on the left
NOTE: you must activate the event recording using the feature explained in
section 3.8.- TS Recorder

Gsertel RCS 100 Specifications

General

Brand	Gsertel
Model	RCS 100
Category	Microphone
Language	English