GDM-8261 User Manual
154
[SENSe:]GAIN:AUTO?
Returns the Auto gain mode.
Return parameter: 0|1, 1=ON, 0=OFF
[SENSe:]CONTinuity:THReshold
Sets the continuity threshold in ohms.
Parameter: <NRf> (0 ~ 1000)
Example: SENS:CONT:THR 500
Sets the continuity threshold to 500
[SENSe:]CONTinuity:THReshold?
Returns the continuity threshold.
[SENSe:]CURRent:DETect
Sets the current auto-detect mode on or off for the current functions.
Parameter: ON | OFF
Example: SENS:CURR:DET ON
Turns the current auto-detect on for the current function.
[SENSe:]CURRent:DETect?
Returns the auto-detect status for the current functions.
Return Parameter: 0|1 1=ON, 0=OFF
[SENSe:]DIGital:SHIFt
Sets the Digital Shift function on or off.
Parameter: ON | OFF
Example: SENS:DIG:SHIF ON
Turn the digital shift function on.
[SENSe:]DIGital:SHIFt?
Returns the Digital Shift function status.
Return Parameter: 0|1 1=ON, 0=OFF
[SENSe:]UNIT
Sets the temperature unit.
Parameter: C|F
Example: SENS:UNIT C
Sets the temperature unit to ˚C.
[SENSe:]UNIT?
Returns the temperature unit.
[SENSe:]FUNCtion[1/2]?
Returns the function displayed on the first or second display.
Return parameter(display 1): VOLT, VOLT:AC, CURR, CURR:AC, RES, FRES,
FREQ, PER, TEMP:RTD, TEMP:TCO, DIOD, CONT, NON (2nd display only)
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
