GW Instek GDM-8261 - Page 156

GDM-8261 User Manual
156
[SENSe:]RESistance:RANGe
Sets the 2W resistance measurement range.
Parameter: Range(<NRf> | MIN | MAX)
Example: SENS:RES:RANG 1000
Sets the resistance range to 1kΩ.
[SENSe:]RESistance:RANGe?
Returns the 2W resistance measurement range.
Parameter: [None] | [MIN | MAX]
[SENSe:]FRESistance:RANGe
Sets the 4W resistance measurement range.
Parameter: Range(<NRf> MIN | MAX)
Example: SENS:FRES:RANG 1000
Sets the 4W resistance range to 1kΩ.
[SENSe:]FRESistance:RANGe?
Returns the 4W resistance measurement range.
Parameter: [None] | [MIN | MAX]
[SENSe:]FREQuency:VOLTage:RANGe
Sets the frequency measurement range.
Parameter: Range(<NRf> MIN | MAX)
Example: SENS:FREQ:VOLT:RANG MIN
Sets the frequency to the minimum frequency range.
[SENSe:]FREQuency:VOLTage:RANGe?
Returns the frequency measurement range.
Parameter: [None] | [MIN | MAX]
[SENSe:]PERiod:VOLTage:RANGe
Sets the period measurement range.
Parameter: Range(<NRf> MIN | MAX)
Example: SENS:PER:VOLT:RANG MIN
Sets the period to the minimum range.
[SENSe:]PERiod:VOLTage:RANGe?
Returns the period measurement range.
Return parameter: [None] | [MIN | MAX]
[SENSe:]VOLTage:DC:RANGe:AUTO
Sets the DC voltage Auto range on/off.
Parameter: ON | OFF
Example: SENS:VOLT:DC:RANG:AUTO ON
Turns Auto-range on for DC voltage measurements.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com