Haas TL Series - Keyboard Introduction

Productivity Inc – Haas CNC TL Series Lathe Operator Manual Page 11
Keyboard Introduction
The keyboard is divided into eight different sectors: Function Keys, Jog Keys, Override
Keys, Display Keys, Cursor Keys, Alpha Keys, Number Keys and Mode Keys. In addition,
there are miscellaneous keys and features located on the pendant and keyboard which
are described briefly on the following pages.
1
-
Function Keys
2
-
Jog Keys
3
-
Over
ride
5
-
Cursor Keys
4
-
Display Keys
6-Alpha Keys 7-Number Keys
8
-
Mode Keys
HAAS
LATHE
S
ERIES