Productivity Inc – Haas CNC TL Series Lathe Operator Manual Page 48
CHAMFER Cutting Cycle:
Next G-code will be created for process #4, out .08 x .08 chamfer on the end of the threads. Press
CANCEL till we get back to the MAIN TABS screen, use the RIGHT or LEFT CURSORS to move to
the OD CHAMFER menu below:
Fill out the details that are needed for the chamfer:
IPS Chamfer Cycle Question Relationship To The Part
Tool Number
Part Offset
X Diameter
Length
Depth Of Cut
Z Dimension
Feed Per Revolution
Surface Footage
Max Spindle Speed
To Next Page
Loading...
