Productivity Inc – Haas CNC TL Series Lathe Operator Manual Page 30
Maintenance of the TL Series Lathe
Even though your TL Series machine has been built to the highest standards, using the highest
available techniques and materials, general maintenance is required on both the machine and on
the control to insure long life of its components.
Haas has gone thru extensive testing to verify the specifications on the required lubricants and
filters that went into your new machine before they ever entered Haas’s production, please use
parts, filters, and lubricants that are as specified to insure longevity of the life of your or your
boss’s investment. This will maintain the highest levels of performance and accuracies for the
longest possible time.
If there is any question on what exactly to use, please refer to the Operator’s Manual for these
specifications or contact the Productivity Service and Parts Department for the proper fluids and
parts required for maintenance.
Productivity, Inc. - Service and Parts
www.productivity.com
MN – 15150 – 25
th
Avenue North, Plymouth, MN 55447
Ph 763-476-8600 Fax 763-476-4092
IA – 9440 Atlantic Drive SW, Cedar Rapids, IA 52404
Ph 319-632-4288 Fax 319-632-4289
NE – 8402 South 117
th
Street, Omaha, NE 68128
Ph 402-330-2323 Fax 402-330-6901
To Next Page
Loading...
