Need help?Do you have a question about the Haas TL Series and is the answer not in the manual?
Basic display layout for the CNC control software, showing different panes.
Overview of the CNC control keyboard layout divided into eight sections.
Steps for powering up the Haas CNC machine and control.
Guidelines for safe operation of machine guarding on TL series lathes.
Explanation of the Dead Man Switch function and its safety requirement.
Procedure for setting tool offsets required for automatic operations.
Steps to define turning tools, including radius and tip type.
How to use the Turn & Face tab for turning and facing operations in IPS.
Using the IPS Drill Cycle for automatic drilling with pecks.
Overview of the IPS menus and navigation for lathe programming.
How to use the Manual Mode within the IPS for machine operation.
Initial setup procedures for stock and tool configuration in IPS.
Using Automatic Mode screens to enter data for machining tasks.
Procedure for performing OD turning operations using IPS.
Guide to using the IPS Peck Drill function for chip removal.
Steps for cutting OD threads using the IPS Threading function.
How to perform OD grooving operations using the IPS.
Process for importing DXF files to build CNC programs.
Applying a tool path operation to a chained group from a DXF file.
Using the IPS recorder to select or create programs for G-code insertion.
Overview of the Live Image feature for real-time part simulation.
Setting up parameters for the Live Image feature.
Configuring stock and jaw dimensions for Live Image simulation.
Setting up tool data for use with Live Image.
To Next Page
General
