Productivity Inc – Haas CNC TL Series Lathe Operator Manual Page 32
Aloris Tool Post Operation
The most often equipped option for the TL series lathe for holding your turning tools is the Aloris
Single Station Tool Post option. This system allows for setting individual tools in their own
respective holders, and allows for a repeating, quick change system, that has extensive options
to allow for safe holding of a wide variety of different tooling products.
Aloris Super-Precision Tool Post
All that is required of the operator to switch from one tool to the next, is to swing the handle in a
counter-clockwise direction to release the current tool, pull the tool-holder up and off of the
Aloris dovetail, slide on the next tool onto the Aloris dovetail, and swing the lever till clockwise to
firmly clamp the tool-holder against the toolpost.
CAUTION: Please take care to never change tools while the machine has the spindle turning or
while the axis are moving!!
To Next Page
Loading...
