Productivity Inc – Haas CNC TL Series Lathe Operator Manual Page 23
Settings
Scrolling through Settings with Jog Handle - The jog handle can now be used to scroll through the
settings. In previous versions, the jog handle could only be used to scroll through (cursor-highlight) the
parameters, but not the settings. This has been corrected. (Any Mill Control Ver. 10.15 and above; any
Lathe Control Ver. 3.05 and above.)
There are many settings which give the user various options over the control of their machine tool. Read
the Settings section of the operator’s manual for all the possible options.
To Next Page
Loading...
