Productivity Inc – Haas CNC TL Series Lathe Operator Manual Page 34
HAAS Intuitive Programming System (IPS)
The most outstanding feature on the TL Series of Haas machines is the Intuitive Programming
System, or IPS. This is a simplified programming system that allows for much faster programming
and setup of the machine, and allows the operator to program using a question and answer
format, rather than a G&M code format.
The objective of this section is to go thru the different IPS system “Tabs” and “Menus” and how
each relates to generating fast and accurate parts from the TL Series Lathe.
The best way to do this from a training point of view, is to start with a typical part print that
would be seen by a Toolroom Lathe machinist, and go thru step by step with the IPS to show how
to manufacture that part on the TL Series Lathe.
To Next Page
Loading...
