Hach 1950Plus - Product Certification; Product Safety Certifications; Electromagnetic Compatibility (EMC) Immunity; Radio Frequency Emissions Testing

Page 180
Certification
4195M0040Certification.fm
Certification
Hach certifies this instrument was tested thoroughly, inspected and found to
meet its published specifications when it was shipped from the factory. The
Hach 1950Plus Analyzer has been tested and is certified as indicated to the
following instrumentation standards:
Product Safety
UL 3101-1 (ETLus)
CSA C22.2 No. 1010.1 (ETLc Certification)
Certified by Hach Co. to EN 61010-1 (IEC1010-1) per 73/23/EEC, supporting
test records by Intertek Testing Services.
Immunity
This equipment was tested for Industrial level EMC per:
EN 61326 (EMC Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use)
per 89/336/EEC EMC:
Supporting test records by Hach Company, certified compliance by Hach
Company.
Standards include:
IEC 1000-4-2:1995 (EN 61000-4-2:1995) Electrostatic Discharge
Immunity (Criteria B)
IEC 1000-4-3:1995 (EN 61000-4-3:1996) Radiated RF Electro-Magnetic
Field Immunity (Criteria A)
IEC 1000-4-4:1995 (EN 61000-4-4:1995) Electrical Fast Transients/Burst
(Criteria B)
IEC 1000-4-5:1995 (EN 61000-4-5:1995) Surge (Criteria B)
IEC 1000-4-6:1996 (EN 61000-4-6:1996) Conducted Disturbances
Induced by RF Fields (Criteria A)
IEC 1000-4-11:1994 (EN 61000-4-11:1994) Voltage Dip/Short
Interruptions (Criteria B)
Additional Immunity Standard/s include:
ENV 50204:1996 Radiated Electro-Magnetic Field from Digital
Telephones (Criteria A)
Emissions
This equipment was tested for Radio Frequency Emissions as follows:
Per 89/336/EEC EMC: EN 61326:1998 (Electrical Equipment for
measurement, control and laboratory use—EMC requirements) Class “A”
emission limits. Supporting test records by Hewlett Packard, Fort Collins,
Colorado Hardware Test Center (A2LA # 0905-01) and certified
compliance by Hach Company.