Page 36
Wiring the Instrument
UVTOCUnpacking Installation Setup.fm
Section 2
6. Reinstall the cover.
7. Ensure the voltage setting switches are in the correct position, see
section 2.2.2 on page 38 and Figure 17 on page 38.
8. Supply power to the instrument after completion of all auxiliary wiring and
after upper door is secured.
Figure 13 Locating and Removing the Customer Access Covers
Figure 14 Electrical Connections at the Surge Suppressor
1. Customer Access Cover 3. Power Supply Access Cover
2. Socket Head Cap Screw (4) 4. Stainless Steel Socket Head Cap Screw (4)
1. User-supplied Cable 2. To Power Supply Module
To Next Page
Loading...
