Troubleshooting 153
Haemonetics
®
ACP-215
®
Service Manual P/N: SM-ACP215-01-EN(AB)
Status Messages
Status messages alert the user that attention is needed to resolve an
operational problem. Status messages usually do not indicate that a
malfunction has occurred, but in some cases, a status message that cannot be
cleared is an indication of a malfunction. One example is a centrifuge cover
latch that passes the system’s start-up tests but during operation causes a
status message that cannot be cleared. This chapter lists status messages that
could be displayed if a hardware failure occurs, although such messages do
not usually indicate a hardware failure. These status messages are listed along
with the CPU generated error messages.
To Next Page
Loading...
