Preventive Maintenance and Installation 73
Haemonetics
®
ACP-215
®
Service Manual P/N: SM-ACP215-01-EN(AB)
6. Ensure that the green on line LED illuminates.
Figure 18, Printer controls
Printer Test 1. On the UTLITIES menu. press MODIFY PROGRAM until the arrow
points to MAINTENANCE, then press START.
2. Press MODIFY PROGRAM until the arrow points to PRINT CALIB, then
press START.
3. Press MODIFY PROGRAM until the arrow points to PRINT CALIB
VALUES, then press START.
4. Verify that the printer prints out the calibration values.
To Next Page
Loading...
